DCC

From EggWiki
Revision as of 04:14, 8 February 2022 by Geo (talk | contribs) (Created page with "== How DCC Chat Works == When you do a /dcc chat <nickname>, your IRC client opens a port on your local machine to listen for an incoming connection, and then sends a message to the other person to connect to your IP and the port you just opened. == Why you can't DCC Chat == Many computers, particularly home computers, are behind firewalls or NAT routers. These devices block incoming connections unless they are specifically configured to pass incoming traffic. We can't...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

How DCC Chat Works

When you do a /dcc chat <nickname>, your IRC client opens a port on your local machine to listen for an incoming connection, and then sends a message to the other person to connect to your IP and the port you just opened.

Why you can't DCC Chat

Many computers, particularly home computers, are behind firewalls or NAT routers. These devices block incoming connections unless they are specifically configured to pass incoming traffic. We can't help you configure your client and router properly in this wiki (but Google can). If you can set up your client and firewall/NAT properly, you can DCC your Eggdrop. Can't do this? See the next section

How CTCP Chat Works

Eggdrop knows a lot of people aren't able to control their firewalls. Since Eggdrop's usuallly run on shells that aren't limited by firewalls or NATs, you can send a '/ctcp <nickname> chat' request. This tells Eggdrop to instead initiate a DCC chat request with you. Just like explained above, now Eggdrop is sending you the IP and port to connect to. Again, assuming Eggdrop is not behind a firewall or NAT, this should initiate a DCC connection between you and your Eggdrop